Network via Ethernet

  • Updated

After the device is switched on for the first time, the setup wizard for the network configuration appears automatically. In this How-To, you will learn how to set up the network over Ethernet.

In the following illustrations, you will find English translations of important terms to help you in this process.

  1. Connect one end of the LAN cable to the RJ45 Ethernet jack on the enforeDasher and the other end to the router.
  2. Select the language. 1.png
  3. Tap on [Cable]. mceclip0.png

    The correct IP configuration is determined automatically.

  4. Tap on [Next]. mceclip1.png
    ⮕ The network connection has been established.
  5. Tap on [Close]. mceclip3.png

Learn more...

Share this article

Was this article helpful?

5 out of 12 found this helpful

Have more questions? Submit a request